High Performance Real-Time Spectrum Analyzers for Performance Applications including complete Vector Signal Analysis and Vector Network Analysis to 3.2 or 6.5 GHz
16M Arb memory Depth Option for the DG1000Z series generators
€149
BAG-DS1000
Instrument Carry Case for a DS1000 Series Oscilloscope
€59
BAG-G1
Instrument Carry Case for a DSA800 Spectrum Analyzer, DG4000 generator, or DS2000 scope.
€129
CB-60A-780MM
Load input 60 A cable. Cable is 30 inches long.
€39
DG800-ARB8M
Memory Depth Upgrade Option to 8 Million points
€69
DS7000-2RL
7000 Series extend maximum memory depth up to 250 Mpts
€739
DSG3000B-PUG
Pulse Train Generator option for DSG3000B Signal Generators
€739
DSG800-PUG
Pulse Train Generator option for the DSG800 Series RF signal sources. Includes DSG800-PUM license automatically.
€739
FH-DG5000
Frequency hopping software license option for DG5000 series AWG
€2,055
HIRES-DP700
1mV / 1 mA Resolution option for the DP700 Series power supplies
€59
HIRES-DP800
1mV/1mA Resolution Option for DP800 Family
€89
LD-DM
TEST LEAD SET FOR DMM
€25
MC3132
32 channel differential Multiplexer module for use with M300 DAQ System Mainframe and MC3065 DMM module. Configurable for 2 or 4 wire measurements. The M3TB32 is the mating terminal block for this module.
€399
MSO8000-BND
Application Bundle including all the serial protocol analysis software, Power Analysis, Waveform Generator, and Jitter/Real time Eye options
€1,999
PLA2216
Logic Probe for MSO5000 Series Oscilloscopes. Includes cable, leads and grabber clips
20 channel differential Multiplexer module for use with M300 DAQ System Mainframe and MC3065 DMM module. Configurable for 2 or 4 wire measurements. The M3TB20 is the mating terminal block for this module.
€329
MSO5000-BND
MSO5000 Series Function and application bundle option including PWR, AWG, and all Serial Decode options.
€599
MSO8000-JITTER
Jitter and Real-Time Eye Diagram Analysis Option
€899
PA1011
10W POWER AMPLIFIER FOR GENERATORS. Requires generator to function.
40 MHz Real Time Bandwidth Option for the RSA5000 Series Real Time Spectrum Analyzers. RSA5000s come standard with 25 MHz Real Time Bandwidth. License code is emailed and user installed.
Soft Carrying Bag for a DSA1000 Series or DSA1000A Series Spectrum Analyzer.
€159
BND-MSO/DS2000A
MSO/DS2000A option bundle including MEM-DS2000, AT-DS2000, SD-DS2000, CAN-DS2000. Special bundle available for a limited time. This option enables deep memory, serial decoding including CAN bus as the advanced triggering options listed in the User's Guide.
€239
BW2T3-MSO/DS4000
Bandwidth upgrade form 200MHz to 350MHz for MSO/DS402x
€2,090
BW2T5-MSO/DS4000
Bandwidth upgrade form 200MHz to 500MHz for MSO/DS402x
€4,180
BW3T5-MSO/DS4000
Bandwidth upgrade form 350MHz to 500MHz for MSO/DS403x
€2,090
CB-20A-780MM
Load input 20 A cable. Cable is 30 inches long.
€19
CB-40A-780MM
Load input 40 A cable. Cable is 30 inches long.
€29
CB-NM-NM-75-L-12G
N(M)-N(M) RF Cable
€179
CB-NM-SMAM-75-L-12G
N(M)-SMA(M) RF Cable
€179
CB-SENSE
Sense Cable for DL3000 Sense inputs
€19
DG-POD-A
16 Channel Digital Signal Generator Module for DG5000 Series Arbitrary Function Generators
Single-dual CH Upgrade Option. Adds second channel to single channel models.
€89
DIGITALIO-DL3
Digital I/O Triggering Option for DL3000 Series Loads. Standard on DL3000A series instruments.
€89
DIGITALIO-DP800
Four channels for trigger in & out option for the DP800 Family
€89
DS1000D
Replacement Logic head kit for digital channel measurements. DS1000D Series models ONLY.
€389
DS7000-5RL
7000 Series extend maximum memory depth up to 500 Mpts
€1,139
DS7000-AERO
7000 Series MIL-STD-1553 serial bus trigger and analysis (MIL-STD-1553)
€739
DS7000-AUDIO
7000 Series Audio serial bus trigger and analysis (I2S)
€739
DS7000-AUTO
7000 Series Auto serial bus trigger and analysis (CAN, LIN)
€739
DS7000-BND
7000 Series Function and application bundle option including PWR, AWG, and all Serial Decode options. AWG option only works on MSO models.
€1,599
DS7000-BW1T2
7000 Series Bandwidth upgrades from 100 MHz to 200 MHz
€839
DS7000-BW1T3
7000 Series Bandwidth upgrades from 100 MHz to 350 MHz
€3,599
DS7000-BW1T5
7000 Series Bandwidth upgrades from 100 MHz to 500 MHz
€6,099
DS7000-BW2T3
7000 Series Bandwidth upgrades from 200 MHz to 350 MHz
€2,799
DS7000-BW2T5
7000 Series Bandwidth upgrades from 200 MHz to 500 MHz
€5,299
DS7000-BW3T5
7000 Series Bandwidth upgrades from 350 MHz to 500 MHz
€2,599
DS7000-COMP
7000 Series PC serial bus trigger and analysis (RS232/UART)
€739
DS7000-EMBD
7000 Series Embedded serial bus trigger and analysis (I2C, SPI)
€739
DS7000-FLEX
7000 Series FlexRay serial bus trigger and analysis (FlexRay)
€739
DS7000-PWR
7000 Series Built-in power analysis Ripple and Power Quality measurements
€739
DSG800-PUM
Pulse modulation option for the DSG800 Series RF signal sources
€549
EMI Bundle
The EMI Bundle includes the S1210 EMI PreCompliance Software, the EMI-DSA800 license option for a spectrum analyzer, and a NFP-3 set of Near Field Probes.
€850
FREQ-DL3
High Frequency Option for DL3000 Series Loads. Standard on DL3000A series instruments. Updates DL3000 Instruments to 30 kHz capability.
€89
LAN-DL3
Ethernet Communication Option for DL3000 Series Loads. Standard on DL3000A series instruments.
€89
M3A2B
Analog bus to banana jack cable for M300 system mainframe. For direct external connection of DM3065 DMM module to external signal.
€14
M3GPIBCONNECTOR
GPIB Reverse connection adaptor for M300 mainframe.
€63
M3TB16
Terminal block accessory for M300 DAQ system modules with model numbers ending in 16.
€70
M3TB20
Terminal block accessory for M300 DAQ system modules with model numbers ending in 20.
€70
M3TB24
Terminal block accessory for M300 DAQ system modules with model numbers ending in 24.
€70
M3TB32
Terminal block accessory for M300 DAQ system modules with model numbers ending in 32.
€70
M3TB34
Terminal block accessory for M300 DAQ system modules with model numbers ending in 34.
€70
M3TB48
Terminal block accessory for M300 DAQ system modules with model numbers ending in 48.
€70
M3TB64
Terminal block accessory for M300 DAQ system modules with model numbers ending in 64.
€70
MC3065
DMM Module for M300 DAQ System. Already included in M301 and M302.
€479
MC3324
24 channel multiplexer module for use with M300 DAQ System Mainframe and MC3065 DMM module. This card has 20 voltage channels configurable for 2 or 4 wire measurements and 4 current only measurement channels. The M3TB24 is the mating terminal block for this module.
€489
MC3534
Multifunction module for use with M300 DAQ System Mainframe. It includes 4 DACs, 4 Totalizers, and 32 DIO bits. The M3TB34 is the mating terminal block for this module.
€549
MSO5000-4CH
Upgrade to 4 Channels (2 Channel models only)
€339
MSO5000-AERO
MSO5000 Series MIL-STD-1553 serial bus trigger and analysis (MIL-STD-1553)
€239
MSO5000-AUDIO
MSO5000 Series Audio serial bus trigger and analysis (I2S)
€239
MSO5000-AUTO
MSO5000 Series Auto serial bus trigger and analysis (CAN, LIN)
€239
MSO5000-AWG
Dual-channel 25 MHz Arbitrary Waveform Generator
€219
MSO5000-BW0T1
MSO5000 Series Bandwidth upgrades from 70 MHz to 100 MHz
€269
MSO5000-BW0T2
MSO5000 Series Bandwidth upgrades from 70 MHz to 200 MHz
€1,199
MSO5000-BW0T3
MSO5000 Series Bandwidth upgrades from 70 MHz to 350 MHz
€2,199
MSO5000-BW1T2
MSO5000 Series Bandwidth upgrades from 100 MHz to 200 MHz
€999
MSO5000-BW1T3
MSO5000 Series Bandwidth upgrades from 100 MHz to 350 MHz
€1,999
MSO5000-BW2T3
MSO5000 Series Bandwidth upgrades from 200 MHz to 350 MHz
€1,099
MSO5000-COMP
MSO5000 Series PC serial bus trigger and analysis (RS232/UART)
€239
MSO5000-E-1RL
MSO5000-E Series - extend maximum memory depth up to 100 Mpts
€219
MSO5000-E-AWG
Single channel 25 MHz Arbitrary Waveform Generator
€149
MSO5000-E-BND
MSO5000-E Series Function and application bundle option including PWR, AWG, and all Serial Decode options.
€549
MSO5000-E-FPC
Front panel cover for the MSO5000-E
€69
MSO5000-FLEX
MSO5000 Series FlexRay serial bus trigger and analysis (FlexRay)
€239
MSO5000-FPC
Front panel cover for the MSO5000 (MSO5000-FPC)
€69
MSO5000-PWR
MSO5000 Series Built-in power analysis Ripple and Power Quality measurements
Rack Mounting Kit for ONE DG1000Z Series Generator. Also works with DSG800 and DG2000 Series. May be different than image. DG1Z rack kits contain mounting ears rather than a shelf or enclosure.
Rack Mounting Kit for TWO DG1000Z Series Generators. Also works with DSG800 and DG2000 Series. May be different than image. DG1Z rack kits contain mounting ears rather than a shelf or enclosure.
Rack Mounting Kit for a DS1000Z Series Oscilloscope or DG4000 Series generator. May be different than image. Rack kits are different for each instrument.
Real Time signal capture option for the spectrum analyzer. Enables 1.5 MHz of real time capture for signals like FSK. Works on the DSA700 series and the DSA815 or DSA815-TG.
€189
T2R1000
Active probe adaptor for connecting TekProbe-BNC probes to a DS6000 or MSO/DS4000
USB-GPIB Converter. Connect USB directly to instrument and control it via GPIB. This does not connect to a PC directly. "-L' Model for DL3000, DG800, and DG900 series.
Full advanced version of UltraStation wave generation software for DG1000Z, DG4000, DG5000 Series generators as well as DS1000Z and DS2000A "-S" embedded generators. This is a software upgrade license.
VSWR Bridge and DSA800-VSWR software for Rigol Spectrum Analyzers. The VB1080's range is from 2-8 GHz. *SW does NOT work with DSA1000 Family. Requires TG Option.
We use cookies to personalise content and to analyse our web traffic. Click the gear to the right to control the cookies used on this site. Click "OK" to confirm your chosen settings.
Essential cookies are used to make the website function properly. A session cookie (PHPSESSID) is required to follow your progress through the website. It is essential to ensure that any information you enter including shopping cart additions, or routes you take are remembered by the website. Without this cookie, every page you visited would treat you as a completely new visitor. This cookie does not identify you personally and is not linked to any other information we store about you except in the case of purchasing items online. In this case it is only used if an error occurs and we are trying to help you process the order. The website cannot function properly without these cookies.
Marketing cookies are used to track visitors across websites. The intention is to display ads that are relevant and engaging for the individual user and thereby more valuable for publishers and third party advertisers. We use a marketing automation toolkit (Act-On) that includes beacons or cookies to track individual activity through the site including downloads, page visits, and other behaviors. This data contains IP address information and may be connected to data from previous sessions or forms filled out including email, name, and additional information. This data is used for selling and marketing activities by RIGOL.
